- Realize Ethernet data transmission over 1~16E1
- Support auto delete the fault E1 channels (BER more than 1E-6 or a serious warning LOS/AIS/LOF or the signal loop back); Auto-restore the use of E1 after eliminate the failure.
- For 16 E1 channels, the maximum tolerable time delay difference between any two can be up to 220ms. It will have an alarm for exceed the limit when the time delay difference over 220ms, meanwhile, business interrupt jitter tolerance, jitter transfer characteristics in the line with ITU-T G.823.
- Provide 4 maximum shared Ethernet interface, support VLAN division based on interface, in the line with IEEE 802.1Q standard
- Provide 1024 pieces MAC address table, 5 minutes aging time
- Support frame length: minimum: 64 bytes, maximum: 1916 bytes.
- Provide flux statistics for each Ethernet interface, such as the fault package number and total package number etc.
- Provide PAUSE flux control function, can be equipped with network management.
- Support trunk super terminal management or network management based on SNMP. (optional)
Line Rate: 2.048Mbps±50ppm
Line Code : HDB3
Interface Standard: ITU-T G.703
E1 Impedance: 75Ω(unbalance)
Connections : dual coax BNC
Jitter tolerance : finer than G.742 and G.823
|16 E1 to ethernet converter,4*10/100M ethernet over 16E1,75ohm(BNC connector),power AC220V or DC48V
|16 E1 to ethernet converter,4*10/100M ethernet over 16E1,120ohm(RJ45 connector),power AC220V or DC48V
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.